感谢选购Khadas Tone1，现在开始享受高品质音乐吧～
包装和配件
| VIMs 版本 | 通用版本 |
|---|---|
| Tone1 (已焊接20脚排针和40脚排座) | Tone1 |
| USB Type C数据线 | USB Type C数据线 |
| 螺丝 | 螺丝 |
| - | 40脚排座 |
| - | 20脚排针 |
设备连接
| 步骤 | 操作 |
|---|---|
| 1 | 把Tone1和VIMs通过40脚排座连接起来 |
| 2 | 连接音频线到RCA座子 |
| 3 | 连接HDMI线到显示器 |
| 4 | 连接5V电源 |
| 步骤 | 操作 |
|---|---|
| 1 | 连接音频线到RCA座子 |
| 2 | 通过USB Type C数据线连接Tone1和PC |
设置
大多数平台已经集成了Tone1驱动，但是Windows平台需要额外安装驱动。
确保VIM1固件版本为VIM_Nougat_V180524或更新。
确保VIM2固件版本为VIM2_Nougat_V180413或更新。
以Windows 10为例进行说明，Windows 7和Windows XP也是类似的。
- 安装XMOS驱动
- 下载驱动
- 解压并运行
setup.exe来安装驱动 - 安装完成后可以在设备管理器看到XMOS设备
- 选择声卡为Tone1
- 点击底部任务栏的声音图标
- 选择XMOS XS1-U8 DJ为默认输出声卡
- 点击底部任务栏的声音图标
- 选择声卡为Tone1
- 选择声卡为Tone1
选择声卡为Tone1
Volumio
Raspbian
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
161.list sound card
$ aplay -l
2.switch sound card
$vi ~/.asoundrc
3.replace card 0 for XMOS sound card
pcm.!default {
type hw
card 0
}
ctl.!default {
type hw
card 0
}
接口描述
| No | Ports | Function |
|---|---|---|
| 1 | USB-C | Power supply & data transmission |
| 2 | S/PDIF | S/PDIF input/output |
| 3 | L | Audio left channel output |
| 4 | R | Audio right channel output |
| 5 | 20Pin Header | Debug Port, update XMOS firmware |
| 6 | 40Pin Header | VIMs connector (Power supply & data transmission) |
| 7 | I2S | VIMs I2S output |
| 8 | 8 Channel Ext | XMOS 8 Channel extend |
| 9 | OLED | VIMs OLED display |
| 10 | Power LED | Power supply indicator |
No5: 20 Pin Header Pinout (J4)
| SIGNAL | PIN | PIN | SIGNAL |
|---|---|---|---|
| VCC_3V3 | 1 | 11 | Tone_5V |
| Linux_TX | 2 | 12 | Tone_5V |
| Linux_RX | 3 | 13 | GND |
| GND | 4 | 14 | GND |
| XL_DN1 | 5 | 15 | XMOS_RST |
| XL_DN0 | 6 | 16 | XMOS_TDO |
| XL_UP0 | 7 | 17 | XMOS_TDI |
| XL_UP1 | 8 | 18 | XMOS_TCK |
| XMOS_3V3 | 9 | 19 | XMOS_TMS |
| GND | 10 | 20 | GND |
No6: 40 Pin Header Pinout (J1)
| SIGNAL | PIN | PIN | SIGNAL |
|---|---|---|---|
| 5V_1 | 1 | 21 | GND5 |
| 5V_2 | 2 | 22 | OLED_SCL |
| VIM_DN | 3 | 23 | OLED_SDA |
| VIM_DP | 4 | 24 | GND6 |
| GND | 5 | 25 | - |
| - | 6 | 26 | - |
| - | 7 | 27 | VCC_3V3 |
| - | 8 | 28 | GND7 |
| GND | 9 | 29 | I2S_SCLK |
| ADC0 | 10 | 30 | I2S_MCLK |
| - | 11 | 31 | I2S_SDO |
| - | 12 | 32 | I2S_LRCK |
| VIM_SPDIF | 13 | 33 | I2S_SDI |
| GND3 | 14 | 34 | GND8 |
| UART_RX_AO_B/SPDIF_MODE | 15 | 35 | OLED_PWREN |
| UART_TX_AO_B/SPDIF_IN_MODE | 16 | 36 | - |
| GND4 | 17 | 37 | OLED_RST |
| Linux_RX | 18 | 38 | - |
| Linux_TX | 19 | 39 | MUTE |
| VCC_3V3 | 20 | 40 | GND9 |
No7: I2S FPC Connectors Pinout (J9)
| PIN | SIGNAL |
|---|---|
| 1 | Tone_5V |
| 2 | GND |
| 3 | VCC_3V3 |
| 4 | GND |
| 5 | I2S_SCLK |
| 6 | I2S_MCLK |
| 7 | I2S_SDI |
| 8 | I2S_LRCK |
| 9 | I2S_SDO |
| 10 | GND |
No8: 8 Channel Ext FPC Connectors Pinout (J3)
| PIN | SIGNAL |
|---|---|
| 1-3 | Tone_5V |
| 4-6 | GND |
| 7,8 | XMOS_3V3 |
| 9 | XMOSIO3 |
| 10 | XMOSIO2 |
| 11 | XMOSIO1 |
| 12 | ADC0 |
| 13 | VOLUME |
| 14 | XMOS_SCL |
| 15 | XMOS_SDA |
| 16 | MUTE |
| 17 | DAC_RST |
| 18 | GND |
| 19 | MCLK |
| 20 | GND |
| 21 | LRCK/DSD_CLK |
| 22 | GND |
| 23 | BCLK/DSD_1 |
| 24 | GND |
| 25 | SIN0/DSD_2 |
| 26 | SIN1/DSD_3 |
| 27 | SIN2/DSD_4 |
| 28 | SIN3/DSD_5 |
| 29 | DSD_6 |
| 30 | GND |
No9: OLED FPC Connectors Pinout (J8)
| PIN | SIGNAL |
|---|---|
| 1 | Tone_5V |
| 2 | Tone_5V |
| 3 | OLED_SCL |
| 4 | OLED_SDA |
| 5 | GND |
| 6 | - |
| 7 | OLED_RST |
| 8 | OLED_PWREN |
| 9 | - |
| 10 | GND |
FAQs
- 如何扩展8通道输出？
XMOS支持8通道模拟输出，Tone1 DAC（ES9038Q2M）已经用了2通道。用户可以增加DAC 8通道扩展。